Style Guard Universal Truck Side Molding (2" x 18ft)

The Style Guard Universal Truck Side Molding By Cowles Products is the best way to add styling and protection to your truck or van. Easy to apply with durable and long lasting professional grade 3M adhesive backing. You can apply the moldings all by yourself with four very simple and easy steps. The Style Guard Universal Side Molding can be applied to any truck or van by cutting and trimming the molding to a specific length of your vehicle. Give your truck that stylish look you've been searching for with the Style Guard Universal Truck Side Molding.

Features:

Easy To Apply In 4 Simple Steps:

STEP 1: Clean the surface area very well to remove all road film, wax
or other material that may prevent a film bond. Allow to dry before applying.

STEP 2: With a tape measure and masking tape, lay down a strait line
of making tape the entire length of the vehicle. The bottom edge of the
tape should be where you want the upper edge of the molding.

STEP 3: You will want a 1/8" gap at each door edge. Starting at the front of your vehicle,
measure the section of molding you will need to reach that gap. Use pruning shears
or a sharp knife to bevel-cut the molding at a 45 degree angle.

STEP 4: Press the molding along the bottom edge of your tape line.
Refer to step 3 and 4 as you do each section.
Do not wash vehicle for 24 hours.