|
Liquid Glass Ultimate Auto Polish & Interior Protectant Kit |
Kit Includes:
1 - Liquid Glass Ultimate Auto Polish (16 oz)
- Coats your vehicle with a
clear, hard, smooth, and mirror-like finish.
Will not crack, chip, peel, or turn yellow.
Contains no wax nor abrasives.
Creates a high gloss protective finish
on any
non-porous surface. No
hard rubbing or buffing required. Clear
coat safe. Use
on your cars, trucks, motorcycles, boats,
RV's, vans and other vehicles. Safe
for use on gelcoats, acrylics, metal flakes,
candy apples, pearls, plastic paints,
epoxies, urethanes, etc. Great
on aluminum, chrome, stainless steel,
and brass as well. Provides excellent protection
normal road, atmospheric
and other sources of pollution and dirt. Retards oxidation on painted metal and fiberglass.
Reduces bottom friction.
Retards barnacles, algae and saltwater corrosion
on both metal and fiberglass hulls. Use
on
aircraft to seal, keep clean,
and reduce surface friction.
Directions:
- Shake bottle
well before using
-
Surface must
be clean and dry
-
Wax residue
on vehicles should be removed
-
Apply
sparingly but evenly using a coarse cotton
cloth in a straight back and
forth movement
-
Apply to
entire vehicle or to one section at a time
-
The surface
should be warm (50°- 90°)
-
Some paint
color may appear on the cloth but
this is only oxidized paint which must
be
removed to reveal the good paint layer beneath
-
After a haze
appears on the surface,
wipe off with a clean dry cloth
-
Allow at
least 4 hours between coats to permit curing
-
Once
buffing/wiping is complete, baking vehicle
in the sun will bond liquid
glass to the surface
-
The more
coats, the more protection is allowed
-
On dark
colored vehicles, streaking
may occur which can be eliminated by
rebuffing the surface with a damp cloth
For
touch-up or repainting:
- Liquid glass
may be removed by first washing
with a strong solution of car wash
detergent
- Then using ateel wool with mineral spirits or
varsol, wipe dry and sand with
desired
grade sandpaper before repainting
1
- Liquid Glass Leather, Vinyl & Rubber Protectant (16 oz.) - Specially formulated to protect
all surfaces
made
of vinyl, leather, rubber and finished wood.
Contains mink oil. Prevents cracking. Protects against water stains.
Restores luster and softness to vinyl and leather. Use
on rubber surfaces such as
automotive tire sidewalls
to protect and looking like new. Guaranteed to
last a minimum of 3 months.
Directions:
-
Apply to a
clean, dry
surface with a clean cloth
-
Wipe evenly across surface
and buff dry with clean cloth
-
Let application set up for several
hours before additional treatments
-
Repeated applications
give better protections
1
- Large Microfiber Cloth - Lightweight fabric, soft to the touch, will not
streak, and is lint-free.
Great for polishing and buffing all paint
surfaces. Size: 12" x 16". Note: Color of towel may vary.
1 - Foam Application Pad - Evenly applies wax, polish, and protectant to all surfaces.