3M Headlight Lens Restoration System & Microfiber Cloth

The 3M™ Headlight Lens Restoration System is designed to restore clarity to headlight lenses that have become yellowed, cloudy, or hazed over time. By restoring clarity to the lens you improve the performance of the headlight and enhance the appearance of the vehicle. Headlight lenses have either a hard surface layer or a UV resistant coating on the outer surface of the lens. Once a lens has been degraded by sun or UV light and becomes yellowed or cloudy, it is necessary to remove that yellowed layer in order to restore clarity to the lens. The effort required to refurbish headlight lenses will vary greatly by vehicle manufacturer, year, make, model, and headlight design. With the 3M™ Headlight Lens Restoration System, you will use a 1200-1600 rpm drill equipped with a backup pad and sanding discs to remove the yellowed layer from the headlight lens surface. A higher rpm drill could generate excessive heat and can cause damage to the headlight lens that is difficult to remove. A lower rpm drill does not work efficiently for this process. Two sanding steps will follow to refine or reduce the sand scratches that are made when removing the yellowed layer. Finally, 3M™ Headlight Lens Polish and a foam pad will remove the fine scratches and put the final clarity on the headlight lens.

NOTE: Large or extremely hazed lenses may require more than one kit

Features:

• Easy, 3-step process requires as little as an hour
  to remove scratches and restore cloudy, dull lenses

• Restores hazy and dull headlight lenses, as well as
  other plastic lens surfaces on your vehicle

• Utilizes the muscle power of a common household (1200-1600 rpm)
  drill to do all the necessary sanding and buffing

Includes:

• 1 - Disc Pad Holder

• 1 - 3M™ Soft Interface Pad

• 6 - 3M™ Sanding Discs

• 4 - 3M™ Finishing Discs

• 1 - 3M™ Trizact™ Disc

• 1 - 3M™ Headlight Lens Polish

• 1 - Buffing Pad

• BONUS: A large microfiber
  cloth that is great for polishing
  and buffing all paint surfaces
  (color may vary)

You Supply:

• Standard household drill (1200-1600 rpm)

• 3M™ Automotive Masking Tape

• Spray bottle and water